Nothing beats a hot shower. It is a wonderful way to relax and it can be beneficial to your health. It can improve circulation and can lessen muscle and joint pain. The steam can help loosen up a cough by breaking up phlegm.
Water heaters, however, account for 12 percent of total household energy use on average. If you aren’t able to upgrade to solar water heating, we don’t recommend giving up the pleasure of a good hot shower. There are many ways to cut your hot water bill. Follow these strategies to keep your energy and water bills down and reduce fossil fuel use.
Don’t Leave the Water Running
Many of us leave the water running when looking for soap, grabbing a few dirty dishes, or brushing teeth. Combined, this adds up and wastes a lot of water and energy. Turn off the faucet when not in immediate use. Also, whenever possible, let the faucet run on low when washing to conserve.
Install Low-flow Plumbing Fixtures
Using water-efficient showerheads and faucets can cut your water use by 25 to 60 percent. Look for a showerhead that uses 1.5 gallons per minute and use an aerator in your faucets to slow the flow of water.
Take Shorter Showers
Filling the tub requires a lot of hot water. The best way to save both energy and water for bathing is to take short showers.
Lower the Temperature of Your Water Heater to 120° F
For every 10° F you lower your hot water heater, you can save three to five percent a year in energy. For most homes, 120° F is the ideal. Turning down the water heater temperature also reduces mineral buildup and corrosion in your water heater and pipes.
Fix Leaky Faucets
One drip per second wastes about 1,660 gallons of water a year! If the faucet is leaking hot water, this can drive up both your energy and water bills. You can fix most drips by simply replacing the washer.
Wash Clothes in Cold Water
Although many think it is better to wash clothes in warm or hot water, this can actually cause some stains to set. Hot water also tends to shrink and fade clothes, thus cold water is gentler. Whenever possible, use cold water for the wash and rinse cycles. Also, front-loading washers use a lot less water on average than top-loaders.
Use an Efficient Dishwasher
Washing dishes by hand can use 27 gallons of hot water. Running an efficient dishwasher can use as little as three gallons per load. Fill up the dishwasher all the way for greater efficiency and use a short wash cycle when possible. When rinsing dishes or recyclables, use cold water to save energy.
Hand Wash Dishes Efficiently
If you are not using a dishwasher, don’t wash dishes individually. Instead, wash a stack of dishes at a time. Fill up a basin with hot, soapy water and turn the tap off. Wash the dishes and then rinse them in standing water.
Insulate Water Heater Pipes
By insulating the first three feet of the hot water pipes on the water heater, you can raise the hot water temperature by 2 to 4° F. This also helps deliver warm water faster to plumbing fixtures. This project is different than insulating water supply pipes to prevent freezing in cold climates.
Insulating the cold water supply (to prevent condensation and humidity issues) and the hot water pipes on the water heater is a simple, low-skill weekend project that most people can do themselves. On gas hot water heaters, keep the insulation at least six inches from the flue.
This post was originally published on June 4, 2019.
You Might Also Like…
How to Cut Your Hot Water Bill
March 23, 2020
Infographic: Water & Global Climate Crisis — What Can You Do?
March 20, 2020
Earth911 Inspiration: What Kind of Difference Will You Make?
March 20, 2020